document number: 94625 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 09-mar-11 1 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 add-a-pak generation vii power modules standard diodes, 60 a vskd56.., vske56.., vskj56.., VSKC56.. series vishay semiconductors mechanical description the add-a-pak generation vii, new generation of add-a-pak module, combines the excellent thermal performances obtained by the usage of exposed direct bonded copper substrate, with advanced compact simple package solution and simplif ied internal structure with minimized number of interfaces. features ? high voltage ? industrial standard package ? low thermal resistance ? ul approved file e78996 ? compliant to rohs directive 2002/95/ec ? designed and qualified for industrial level benefits ? excellent thermal performances obtained by the usage of exposed direct bonded copper substrate ? up to 1600 v ? high surge capability ? easy mounting on heatsink electrical description these modules are intended for general purpose high voltage applications such as high voltage regulated power supplies, lighting circuits, temperature and motor speed control circuits, ups and battery charger. product summary i f(av) 60 a type modules - diode, high voltage add-a-pak major ratings and characteristics symbol characteristics values units i f(av) 114 c 60 a i f(rms) 94 i fsm 50 hz 1300 60 hz 1360 i 2 t 50 hz 8.44 ka 2 s 60 hz 7.68 i 2 ? t 84.5 ka 2 ? s v rrm range 400 to 1600 v t j - 40 to 150 c t stg
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 94625 2 revision: 09-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vskd56.., vske56.., vskj56.., VSKC56.. series vishay semiconductors add-a-pak generation vii power modules standard diodes, 60 a electrical specifications voltage ratings type number voltage code v rrm , maximum repetitive peak reverse voltage v v rsm , maximum non- repetitive peak reverse voltage v i rrm maximum at t j = 150 c ma vsk.56 04 400 500 10 06 600 700 08 800 900 10 1000 1100 12 1200 1300 14 1400 1500 16 1600 1700 forward conduction parameter symbol test conditions values units maximum average forward current at case temperature i f(av) 180 conduction, half sine wave 60 a 114 c maximum rms forward current i f(rms) dc at 90 c case temperature 94 a maximum peak, one-cycle forward, non-repetitive surge current i fsm t = 10 ms no voltage reapplied sinusoidal ha lf wave, intitial t j = t j maximum 1300 t = 8.3 ms 1360 t = 10 ms 100 % v rrm reapplied 1090 t = 8.3 ms 1140 maximum i 2 t for fusing i 2 t t = 10 ms no voltage reapplied 8.44 ka 2 s t = 8.3 ms 7.68 t = 10 ms 100 % v rrm reapplied 5.97 t = 8.3 ms 5.43 maximum i 2 ? t for fusing i 2 ? t t = 0.1 ms to 10 ms, no voltage reapplied 84.5 ka 2 ? s low level value of threshold voltage v f(to)1 (16.7 % x ? x i f(av) < i < ? x i f(av) ), t j = t j maximum 0.74 v high level value of threshold voltage v f(to)2 (i > ? x i f(av) ), t j = t j maximum 0.86 low level value of forward slope resistance r f1 (16.7 % x ? x i f(av) < i < ? x i f(av) ), t j = t j maximum 3.94 m ? high level value of forward slope resistance r f2 (i > ? x i f(av) ), t j = t j maximum 3.43 maximum forward voltage drop v fm i fm = ? x i f(av) , t j = 25 c, t p = 400 s square wave 1.6 v blocking parameter symbol test conditions values units maximum peak reverse leakage current i rrm t j = 150 c 10 ma maximum rms insulation voltage v ins 50 hz 3000 (1 min) 3600 (1 s) v
document number: 94625 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 09-mar-11 3 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vskd56.., vske56.., vskj56.., VSKC56.. series add-a-pak generation vii power modules standard diodes, 60 a vishay semiconductors note ? table shows the increment of thermal resistance r thjc when devices operate at different conduction angles than dc thermal and mechanical specifications parameter symbol test conditions values units junction and storage temperature range t j , t stg - 40 to 150 c maximum internal thermal resistance, junction to case per leg r thjc dc operation 0.33 c/w typical thermal resistance, case to heatsink per module r thcs mounting surface flat, smooth and greased 0.1 mounting torque 10 % to heatsink a mounting compound is recommended and the torque should be rechecked after a period of 3 hours to allow for the spread of the compound. 4 nm busbar 3 approximate weight 75 g 2.7 oz. case style jedec add-a-pa k gen. vii (to-240aa) ? r conduction per junction devices sine half wave conduction re ctangular wave conduction units 180 120 90 60 30 180 120 90 60 30 vsk.56 0.115 0.136 0.173 0.236 0.346 0.09 0.145 0.185 0.243 0.349 c/w
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 94625 4 revision: 09-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vskd56.., vske56.., vskj56.., VSKC56.. series vishay semiconductors add-a-pak generation vii power modules standard diodes, 60 a fig. 1 - current ratings characteristics fig. 2 - current ratings characteristics fig. 3 - forward power loss characteristics fig. 4 - foward power loss characteristics fig. 5 - maximum non-re petitive surge current fig. 6 - maximum non-re petitive surge current average forward current (a) maximum allowable case temperature (c) 0 10203040506070 100 110 120 130 140 150 180 120 90 60 30 rthjc (dc) = 0.33c/w average forward current (a) maximum allowable case temperature (c) 0 20 40 60 80 100 100 110 120 130 140 150 180 120 90 60 30 rthjc (dc) = 0.33c/w average forward current (a) maximum average forward power loss (w) 0 10203040506070 0 10 20 30 40 50 60 70 80 90 180 120 90 60 30 rms limit per leg, tj = 150c average forward current (a) maximum average forward power loss (w) 0 20406080100 0 20 40 60 80 100 120 180 120 90 60 30 rms limit dc per leg, tj = 150c peak half sine wave forward current (a) number of equal amplitude half cycle current pulses (n) 110100 200 400 600 800 1000 1200 at any rated load condition and with rated vrrm applied following surge initial tj = tj max @ 60 hz 0.0083 s @ 50 hz 0.0100s per leg peak half sine wave forward current (a) pulse train duration (s) 0.01 0.1 1 200 400 600 800 1000 1200 1400 maximum non-repetitive surge current versus pulse train duration. initial tj = 150c no voltage reapplied rated vrrm reapplied per leg
document number: 94625 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 09-mar-11 5 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vskd56.., vske56.., vskj56.., VSKC56.. series add-a-pak generation vii power modules standard diodes, 60 a vishay semiconductors fig. 7 - forward power loss characteristics fig. 8 - forward power loss characteristics fig. 9 - forward power loss characteristics total rms output current (a) maximum total forward power loss (w) maximum allowable ambient temperature (c) 0 20 40 60 80 100 120 140 160 0 0 0 0 0 0 0 rthsa = 0.5 c/w 0.7 c/w 1 c/w 1.5 c/w 2 c/w 3 c/w 7 c/w 020406080100 0 20 40 60 80 100 120 180 (sine) vsk.56 series per leg, tj = 150c dc total output current (a) maximum total power loss (w) 0 20 40 60 80 100 120 140 160 rthsa = 0.1 c/w 0.2 c/w 0.3 c/w 0.5 c/w 1 c/w maximum allowable ambient temperature (c) 0 20 40 60 80 100 120 140 160 0 100 200 300 400 500 180 (sine) 180 (rect) 2 x vsk.56 series single phase bridge connected tj = 150c total output current (a) maximum allowable ambient temperature (c) maximum total power loss (w) 0 20 40 60 80 100 120 140 160 rthsa = 0.3c/w 0.4 c/w 0.5 c/w 0.7 c/w 1 c/w 1.5 c/w 3 c/w 0 20 40 60 80 100 120 140 160 0 100 200 300 400 500 120 (rect) 3 x vsk.56 series three phase bridge connected tj = 150c
www.vishay.com for technical questions, contact: indmodules@vishay.com document number: 94625 6 revision: 09-mar-11 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vskd56.., vske56.., vskj56.., VSKC56.. series vishay semiconductors add-a-pak generation vii power modules standard diodes, 60 a fig. 10 - forward voltage characteristics fig. 11 - thermal impedance z thjc characteristics ordering information table note ? to order the optional hardware go to www.vishay.com/doc?95172 instantaneous forward voltage (v) instantaneous forward current (a) 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 1 10 100 1000 tj = 25c tj = 150c per leg square wave pulse duration (s) transient thermal impedance z thjc (c/w) 0.001 0.01 0.1 1 10 0.01 0.1 1 steady state value rthjc = 0.33 c/w (dc operation) per leg 1 - module type 2 - circuit configuration (see circuit configuration table) 3 - current code (60 a) 4 - voltage code (see voltage ratings table) device code 4 13 2 vsk d 56 / 16
document number: 94625 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 09-mar-11 7 this datasheet is subject to change without notice. the product described here in and this datasheet are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 vskd56.., vske56.., vskj56.., VSKC56.. series add-a-pak generation vii power modules standard diodes, 60 a vishay semiconductors circuit configuration circuit description circuit configuration code circuit drawing two diodes doubler circuit d two diodes common cathodes c two diodes common anodes j single diode e links to related documents dimensions www.vishay.com/doc?95369 v s kd... ~ (1) (3) (2) - + 1 2 3 +- - v s kc... (1) (3) (2) 1 2 3 - + + v s kj... (1) (3) (2) 1 2 3 - + v s ke... 1 2 3 (3) (2)
document number: 95369 for tec hnical questions, contact: indmodules@vishay.com www.vishay.com revision: 11-nov-08 1 add-a-pak generation vii - diode outline dimensions vishay semiconductors dimensions in millimeters (inches) 35 ref. 30 0.5 (1.18 0.020) 29 0.5 (1 0.020) viti m5 x 0.8 screws m5 x 0.8 18 (0.7) ref. 6.7 0.3 (0.26 0.012) 24 0.5 (1 0.020) 1 2 3 4 5 7 6 80 0.3 (3.15 0.012) 92 0.75 (3.6 0.030) 20 0.5 (0.79 0.020) 20 0.5 (0.79 0.020) 15 0.5 (0.59 0.020) 22.6 0.2 (0.89 0.008) 6.3 0.2 (0.248 0.008)
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
